Shoring & Concrete
Durable pipe scaffolding solutions for safe and efficient construction at any project site.
Heavy Duty Shoring Post
PS01 3’6″ to 6′
PS02 5’6″ to 8′
PS03 6’6″ to 11′
PS04 8’6″ to 13′
PS05 10’6″ to 16′
Made of High-Quality Steel
Finish: Hot-Dip Galvanized
Shoring Post Tripod
The Shoring Tripod is a simple and fast way to keep shores upright during the setup process. It’s all steel, foldable for easy storage and transport, and it’s removable.
8"x8" U Head
8″x8″ shoring u-heads are designed for use with A-beams and shoring timbers. Hot-Dip Galvanized to help prevent corrosion.
4"x8" U Head
Provide Support and Stability with the 4″ x 8″ U-Head for Scaffold Frame Legs
Shoring Scaffold Base Plate
A Shoring Scaffold Base Plate is used to provide stability and safety for scaffolding. It attaches to the bottom of a scaffold frame leg to prevent flaring out and distribute weight.
Shoring Scaffold Screw Jack
A shoring scaffold screw jack is used to level shoring frames in uneven terrain. It is placed between two shoring frames or between a shoring base plate and shoring frame.
Shoring scaffold Socket Jack
A shoring scaffold socket jack is used to level shoring frames in uneven terrain. It is placed between two shoring frames or between a shoring base plate and shoring frame.
Shoring screw Jack with U Head
A U-Head screw jack is used in scaffolding and shoring posts. It is made of low-alloy structural steel. The jack features a heavy-reinforced U-Head base plate.
Shoring Scaffold Frame
A shoring scaffold frame is used for supporting concrete in construction and repair. It is built to withstand a greater weight load than traditional scaffolding and is used to build up shoring scaffolding units.
Shoring Walkthru Frame
A shoring walkthru frame is a heavy-duty concrete shoring frame used for support in construction applications.
Angle Cross Brace
An Angle Cross Brace is a piece used to support heavy cross arm construction. It is attached to the underside of the cross arm with bolts and is used in scaffold and construction applications.
Shoring Frame Coupling Pin
The Shoring Coupling Pin is an essential component for secure and efficient scaffolding assembly. Crafted from high-strength steel, this pin is designed to join shoring frames and braces with precision, ensuring stability and safety on construction sites.
Shoring to Scaffold Coupling Pin
A Shoring to Scaffold Coupling Pin is an essential component for secure and efficient scaffolding assembly. It is used to connect shoring scaffold frame to regular scaffold frame.
Rivet & Hitch Pin
A Rivet & Hitch Pin is used to secure the Shoring Connector in a Shoring Frame.
3"x2" Swivel Clamp
Made of High-Quality Steel
Drop Forged.
Electro Galvanized Finish
Snug Fit on 3″ & upto 2″ Pipe
3"x2" Right Angle Clamp
Made of High-Quality Steel
Drop Forged.
Electro Galvanized Finish
Snug Fit on 3″ & upto 2″ Pipe
2-1/2"x2" Swivel Clamp
Made of High-Quality Steel
Drop Forged.
Electro Galvanized Finish
Snug Fit on 3″ & upto 2-1/2″ Pipe
2-1/2"x2" Right Angle Clamp
Made of High-Quality Steel
Drop Forged.
Electro Galvanized Finish
Snug Fit on 2-1/2″ & upto 2″ Pipe
3" Stud Clamp
Made of High-Quality Steel
Drop Forged.
Electro Galvanized Finish
Snug Fit on 3″ Pipe
2-1/2" Stud Clamp
Made of High-Quality Steel
Drop Forged.
Electro Galvanized Finish
Snug Fit on 2-1/2″ Pipe
Quickrete Concrete Mix
Ideal for pouring concrete slabs and setting posts
4000 psi average compressive concrete strength
For pouring concrete 2 in. thick or more
5000 PSI Concrete Mix
5000 PSI Concrete Mix offers faster strength gain and improved workability for concrete work exceeding 2″ thickness.
Fast Setting Quickrete Concrete Mix
Quikrete Fast-Setting Concrete Mix is a special blend of cement with specifically graded fine & coarse aggregates. It is designed to set hard in approximately 20 to 40 minutes.
Sand mix Quickrete Concrete Mix
Sand mix Quickrete Concrete Mix is a uniformly blended mixture of sand and Portland cement. It is used for patching and leveling steps, walks, and floors.
SPEC Mix Type N #80
Spec Mix Type N is a pre-blended mortar mix containing Portland cement, hydrated lime, and sand.
Colors available : 101, 129, 201, 202, 203, 204, 206, 207, 208, 405, 209, 210, 212, 109, 110, 406, 103,213,214,216, 217, 218, 333, 219 and Standard Grey.
SPEC Mix Type S #80
Spec Mix Type N is a pre-blended mortar mix containing Portland cement, hydrated lime, and sand.
Colors available : 101, 129, 201, 202, 203, 204, 206, 207, 208, 405, 209, 210, 212, 109, 110, 406, 103,213,214,216, 217, 218, 333, 219 and Standard Grey.
Steel Concrete Form
Steel concrete form systems are heavy-duty and adaptable concrete formwork systems. They are used for pouring concrete slabs, columns, piers, walls, and other heavy structures.All different sizes are available.
Heavy Duty X Flat Tie
Heavy Duty X Flat Ties are used for securing and spacing modular type forms. They are manufactured from high-strength steel and are designed to provide strong and secure connections in concrete formwork systems.
Wedge Bolt
The Wedge-Bolt anchor is a one piece, heavy duty screw anchor with a finished hex head.
Long Wedge Bolt
Wedge-Bolt screw anchors are designed to be used with a matched tolerance
Wedge-BitTM for optimum performance.
Slab Bolster Upper
Slab Bolster Upper – Plain metal bar supports are used in commercial concrete projects to support reinforcing steel in elevated concrete decks, footings, slab on metal deck, bridge decks and other applications.
Galvanized Anchor Bolt
Galvanized anchor bolts are anchor bolts that have been dipped in molten zinc to coat the entire fastener
Truss Mesh
4″6″8″10″12″ Block Size
Standard Weight: 9 Gauge Wire
10′ (Standard Length)
Hot-Dip Galvanized
Reinforces a variety of masonry walls
Greatly reduces cracking that can arise from thermal stresses
Enhances resistance to water penetration, as cracks are controlled
Ladder Mesh
4″6″8″10″12″14″16″ Block Size
Standard Weight: 9 Gauge Wire
10′ (Standard Length)
Hot-Dip Galvanized
Ladder Mesh Reinforcement’s cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars
Brick Tie
3″, 3 1/2″, 4″, 4 1/2″, 5″ Size
Standard Weight: 9 Gauge Wire
Dovetail Head: Standard 12 Gauge
Dovetail Head: 9/32″ dia hole
Vee Wall Tie Diameter: Standard 3/16″ or Heavyweight 1/4″
Hot-Dip Galvanized
Corrugated Brick Tie
3 1/2″ & 5 1/2″ Length
1 1/4″ Wide
Hot-Dip Galvanized
- 14 ga
- 16 ga
Concrete Wire Mesh Roll
Concrete Wire Mesh Rolls are made from interconnected steel wires, forming a grid pattern that provides additional strength to concrete.
Concrete Wire Mesh Panel
Concrete Wire Mesh Panel is a grid made of steel wires that is used to reinforce concrete, prevent cracks, and add tensile strength. It is cut to size on the construction site and positioned before the concrete is poured.
16G Tie Wire
6 gauge tie wire is a soft annealed wire that is perfect for gardening or general house repairs. It can be bent into any shape and is ideal for tying rebar, trellis, and training plants.
Concrete Expansion Joint
A concrete expansion joint is a planned point of separation between two concrete slabs or structures that allows movement due to thermal expansion and contraction.
White Sand Bag
White Sand Bags are designed for temporary flood control, erosion control, construction, landscaping, and storage of dry materials.
Concrete Cure Blanket
Concrete curing blankets, also known as curing covers or curing mats, are insulated blankets specifically designed to regulate the temperature and moisture levels during the curing process of freshly poured concrete
Concrete Mixer
A Concrete Mixer is an essential piece of equipment in the construction industry, used to combine the necessary ingredients to form concrete. It blends cement, aggregate in construction projects.
Concrete Mixer with Stand
A Concrete Mixer is an essential piece of equipment in the construction industry, used to combine the necessary ingredients to form concrete. It blends cement, aggregate in construction projects.
Concrete Float
48 in. x 8 in. Magnesium Bull Float with a round end is used for smoothing freshly placed concrete. It is equipped with a pivoting worm gear bracket. This kit comes with 2 additional 6 ft. handles that can be connected as needed for required operating length
Concrete Float
Magnesium Concrete Bull Float with Bracket.
48 inches in length.
Very durable and long wearing
24 in. Concrete Broom
Memory resistent green nylon bristles.
Ideal for applying a fine/medium finish to Newley poured concrete surfaces.
2 1/2″ bristle length.
Bristles are set in a laquered hardwood block.
Fits any 15/16″ (24mm) diameter standard threaded handle.
Marshalltown Finishing Trowel
16″ x 4″ Finishing Trowel.
Made from the highest grade spring steel, properly shaped and tempered.
Fully rounded ends prevent the blade from digging into the concrete
Aluminum alloy mounting is lightweight but very strong
Curb Outside Tool
Memory resistent green nylon bristles.
Ideal for applying a fine/medium finish to Newley poured concrete surfaces.
2 1/2″ bristle length.
Bristles are set in a laquered hardwood block.
Fits any 15/16″ (24mm) diameter standard threaded handle.
Universal Groover
Popular among concrete finishers
Stainless steel blade
Makes 1/2 In. x 1/2 In. groove
Turned up edges to move smoothly through concrete
Cuts control joints in concrete
Rivet free for a smooth finish
Heavy Bristal Push Broom
24″ Wide Sweep Broom
Wooden Handle Featuring Steel Brace with Bolt-On Connector
Stiff, Synthetic Bristles
Works on Wet or Dry Surfaces
Medium Bristal Push Broom
Metal braces prevent unthreading and provide additional support.
Sweep up dust and heavy debris.
Stiff bristles inside, fine bristles outside.
60″ bolt tip handle.
Let's Get In Touch
Contact us today for durable, reliable pipe scaffolding solutions.
