Pipe Scaffold

Durable pipe scaffolding solutions for safe and efficient construction at any project site.

Walkthru Scaffold Frame

6’4″ High Frame 5′, 42″, 3′ Wide

Top Lock: 6″

4′ Stud Center

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

Masonry Scaffold Frame

5′ Wide 6’4″, 5′, 4′, 3′, 2′ High Frame

Top Lock: 6″

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

Ladder Type Scaffold Frame

6’4″ High Frame 2′ & 3′ Wide 

Top Lock: 6″

4′ Stud Center

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

Scaffold Cross Braces

Durable construction with 1-inch O.D. galvanized steel tube for maximum longevity, 16-Gauge below sizes: –

4’x4′    5’x4′    6’x4′    7’x2′

7’x3′    7’x4′    8’x1′    8’x2′

8’x2′    8’x3′    8’x4′    10’x4′

Scaffold Aluminum Plank

5′ Wide 5′ High Frame

Top Lock: 6″

4′ Stud Center

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

Osha Plank

2″ x 10″ x 10′ OSHA Scaffold Plank

OSHA approved Scaffold Plank

Edges are “Clipped” to reduce end-shearing and ease of handling.

Ends are “Rodded” to reduce end cupping or splitting.

Screw Jack with Base Plate

24″ length, 18″ adjustable length

Notched 6″ from the top to prevent over-extending

6″ x 6″ Welded on Base Plate

Electroplated for longevity & rust prevention

Socket Screw Jack

28″ overall stem length, 16″ adjustable stem length

Notched 6″ from the top to prevent over-extending 

Socket accepts a 1-3/8″ stem of our 8″ Caster, Base Plate & Swivel Base Plate

Side Bracket

20″, 30″, 40″, 50″ Side Bracket hold 2, 3, 4, 5 Planks.

Suitable for Aluminum Plank.

Made of High-Quality Steel

Finish: Powder Coated Blue

End Bracket

20″, 30″ End Bracket hold 2, 3 Planks.

Suitable for Aluminum Plank.

Made of High-Quality Steel

Finish: Powder Coated Blue

Scaffold Fix Base Plate

Base Plates provide a solid foundation for your frames and help to distribute weight evenly

Electroplated for longevity & rust prevention.

Designed for use on level surfaces.

it’s compatible with most scaffolding types.

Scaffold Swivel Base Plate

5′ Wide 2′ High Frame

Top Lock: 6″

1′ Stud Center

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

Scaffold Wall Tie

3′, 4′, 5′ and 6′ Length available

Wall ties are used in conjunction with clamps to connect scaffolding to the wall as you go up. 

Guardrail Post

Female Corner Guardrail Post

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

Single Guardrail

Available in 3′, 42″, 4′, 5′, 6′, 7′, 8′ Length

Meet OSHA fall protection requirements.

Ends of Guard Rails are stamped with dimensions

Pre-Galvanized for maximum longevity

6' Access Ladder

6′ Access Ladder Width: 15″ (center of beam-to-center of beam)
Rung distance: 11″ (evenly spaced)
Constructed of high-strength steel.
This Access Ladder is stackable and can be attached to any of our Access Ladders.

Stairway

scaffolding stair unit is deigned to be used with walk-thru scaffolding frames. These stairs hook into the inside of the frame allowing you to create a stairwell out of your scaffolding. The stairs can be configured to either access multiple levels of scaffolding or for top access only. The scaffolding stair unit comes with inside and outside hand rails

8" Caster Wheel / Scaffold wheel

8″ caster wheel that used for stacking multiple scaffolding units.

two locking holes to fit more scaffold frames

Includes 6-millimeter wheel frame and rubber wheel fitted with a cast-iron hub with grease adaptor

Load capacity: 750 pounds

5' End Gate

49″ End Gate for walkthrough scaffolding Frame with 5′ width Increase safety and fall prevention

Made of High-Quality Steel

Finish: Powder Coated Blue

8' Double Guardrail

5′ Wide 2′ High Frame

Top Lock: 6″

1′ Stud Center

Made of High-Quality Steel

Lock Type: Drop Lock

Drilled Hole: 45 degree

Finish: Powder Coated Blue

9" Coupling Pin with Spring Pin

Coupling pin with 1″ collar, includes lock spring.

Use with standard or Walk Thru scaffold frames

Pin diameter 1-3/8″

overall length 9″

Gravity Pin

Premium Quality Scaffolding Toggle Locking Pins For Scaffold Frame.

Galvanized Scaffolding Toggle Pins 3″ Long 11/ 32″ Diameter.

Stair Pin

Made of High-Quality Steel

Electro Galvanized for Long Life

 

Span Pin / Caster Wheel Pin

Multi-use fastener with many applications. We commonly sell this square version with our Multifunction unit, because it is an ideal fit for the square tube

2"x2" swivel Clamp

2″ x 2″ Swivel Clamp

Fits 1.6″ – 2″ Scaffold Tubing

All Forged.

Zinc Plated.

Made of High Quality Steel

2"x2" Right Angle Clamp

2″ x 2″ Right Angle Clamp

Fits 1.6″ – 2″ Scaffold Tubing

All Forged.

Zinc Plated.

Made of High Quality Steel

2" Stud Clamp

2″ Stud Clamp

Fits 1.6″ – 2″ Scaffold Tubing

All Forged.

Zinc Plated.

Made of High Quality Steel

2" Beam Clamp

2″ Beam Clamp

All Forged.

Zinc Plated.

Made of High Quality Steel

This scaffolding clamp is designed to connect scaffold tubes directly to steel beams; 2″ opening.

Deep Truss

16′, 18′, 20′, 22′, 24′ length

This Deep Truss is used to span openings such as doors, walkways, openings, windows, etc.

Putlog

10′, 12′, 14′ length

This Putlog is used to span openings such as doors, walkways, openings, windows, etc.

Putlog Hanger

Putlog Hanger Used to place a Scaffold Frame on top of a Putlog or Deep Truss.
For use with 1.69″ (1-11/16″) Scaffold Frames
Hole is drilled at a 45° to pin Scaffold Frame.

Finish: Powder Coated Blue

Scaffold Saddle Pin

Saddle Pin Used to place a Scaffold Frame on top of a Frame Bearer or Putlog.
Perfect for stacking a Narrow Frame on top of a Wider Frame.
For use with 1.69″ (1-11/16″) Scaffold Frames
Hole is drilled at a 45° to pin Scaffold Frame.

Parallel Hanger

This Putlog Hanger is used to support a Putlog (Truss).

Can be used at a Right Angle or Parallel to the Frame Bearer.

Slips over the top of the Frame Leg & Coupling Pin and is secured to the Frame Leg with the U-Bolt.

Right Angle Hanger

This Putlog Hanger is used to support a Putlog (Truss).

used at a Right Angle to the Frame Bearer.

secured to the Frame Leg with the Bolt.

Debris Netting

8’6″x150′ Black & White Color.

Fire Retardant.

1/4″, 1/8″ Hole Size

Debris Netting is your ultimate source protection from debris that falls from the working deck. Our heavy duty, fire resistant, OSHA Complied debris netting,

Scaffold Sheet

8’6″ x 100′ Scaffold Sheet.

Fire Retardant.

Durable and reusable.

Weather protection.

Scaffold sheeting is a laminated polypropylene material with reinforced webbing bands with the pre-punched eyelet holes in 4 in. intervals

Cable Tie

Different Sizes Available

UV Rated.

Made with High Quality Nylon

Operating Temperature -40º – 185º F

High Resistance To Sun & Outdoor Exposure

Smooth Finish, Saves Hands From Abrasion

Elastic Bungee / Toggle Tie

Elastic bungee toggle ties are a type of fastener which are similar to cable ties but have a plastic toggle at one end and a hook at the other end. They are made of elastic bungee cord that can stretch and contract to fit different sizes and shapes.

used in the scaffolding industry to tie scaffold sheeting

6' Baker Scaffold

1,100 lb (500 Kg) load capacity.

Stackable up to 3 units high.

Double locking 5″ casters

Quick and easy height adjustment.

ANSI  and OSHA Approved.

This Baker Scaffold is a common choice for construction, industrial settings, and home renovation projects.

Adjustable at 2-inch increments.

safely reach up to 12 ft high

Baker Outrigger & Guardrail

Mandatory safety component when stacking scaffolding

14″ outriggers are mandatory for scaffolding two sections tall

Two doors on Guardrail allow easy access to the platform

Guardrail Includes toe board 

ANSI  and OSHA Approved.

12" Scaffolding Pulley

This Heavy-Duty Pulley can be use upto 1″ Rope Rated for 1,000 lb
Powdered Coated for long life.

 

Heavy-Duty Pulley Bracket

Heavy-Duty Hoist arm assembly attaches to the top of a frame by sliding down over a stack pin and a lower brace assembly fitting snuggly up with a Gravity pin assembly.

 

Let's Get In Touch

Contact us today for durable, reliable pipe scaffolding solutions.

Submission Received

Thank you for filling out the form! A member of our team will reach out to you shortly at the provided phone number.